Expansion Joints in Heat Exchangers
In order to exchange heat, a heat exchanger always has a hot side and a cold side. The hotter fluid can be on either the shell or tube side, but the…
Tag: Heat exchanger failure
#MetalMarketUpdate – JULY 2025
The ISM Manufacturing PMI registered 49 percent in June, a 0.5-percentage point increase compared to the 48.5 percent recorded in May. The overall economy continued in expansion for the 62nd…
#MetalMarketUpdate – JUNE 2025
The ISM Manufacturing PMI registered 48.5 percent in May, 0.2 percentage point lower compared to the 48.7 percent recorded in April. The overall economy continued in expansion for the 61st…
Explosion Cladding
If a vessel requires thick shells and heads due to the design conditions but also needs the corrosion resistance of an expensive nickel alloy, it could be a very expensive piece of equipment.…
#MetalMarketUpdate – APRIL 2025
The ISM Manufacturing PMI registered 49 percent in March, 1.3 percentage points lower than the 50.3 percent recorded in February. The overall economy continued in expansion for the 59th month…
Featured Report #MetalMarketUpdate – MARCH 2025
The ISM Manufacturing PMI registered 50.3 percent in February, 0.6 percentage point lower compared to the 50.9 percent recorded in January. The overall economy continued in expansion for the 58th month after…
