2021 Code: Engineering Requirements
The 2021 edition of the code is now mandatory for all new orders as of January 1, 2022. Many updates and changes were made in this edition of the code.…
Tag: engineering
Supplemental Process Equipment (“Valves”) – #MetalMarketUpdate – December 2021.
Valves are the most common type of processing equipment. Valves are used for many purposes: Isolation Throttling Safety Release (discussed in a previous segment) Sampling Flush Bottom Within each basic…
Non-Destructive Testing Methods: Internal Rotary Inspection System (IRIS)
Similar to eddy current testing, this test method uses an internal probe to inspect heat exchangertubes. But unlike eddy current, ultrasonic inspection is the basis of the method. The IRIS…
#METALMARKETUPDATE – NOVEMBER ’21
The ISM Manufacturing Index (PMI) retreated slightly in October, registering a 60.8 reading compared to September’s 61.1. This still marks the 17th consecutive month of growth, despite the slight drawback. The October reading…
Non-Destructive Testing Methods: Helium Leak Test
A helium leak test can be used to find through-wall leaks in pressure equipment and welds. A vessel or exchanger is first filled with 5-10 psi of helium and sealed.…
SUPPLEMENTAL PROCESSING EQUIPMENT – Pressure / Vacuum Relief Devices – #METALMARKETUPDATE – September ’21
Every piece of equipment in a process system should be carefully considered and specified. Arguably the most important safety-related process equipment is the over-pressure control devices. This is considered the…
